1. The beam column structure of the building shall adopt the medium-sized combined building formwork. Due to the change of beam column section, it is not suitable to use multi-layer plate cutting, so it is suitable for medium-sized composite building formwork.
2. wall formwork can also be medium-sized composite building formwork. Due to the relatively uniform requirements of the same type of high-rise buildings, the formwork of medium-sized composite buildings helps to ensure a high turnover rate.
3. "hydraulic climbing formwork" should be used in the core area of super high-rise or high-rise buildings. Climbing formwork technology combines the advantages of large formwork and sliding formwork. It can be gradually increased with the structural construction, with fast construction speed, less on-site and tower crane hoisting times, safe high-altitude operation, and no external scaffold. It is especially suitable for the construction of steel structure concrete inner pipe.
4. it is recommended to use the whole multilayer board as the building formwork, and try to use the multilayer building formwork covered with phenolic resin with a thickness of 15 ~ 18 mm. If the edge of the building formwork is damaged after reuse, it shall be cut in time to ensure that the edge of the multilayer board is flat.
