During the transportation and storage of the formwork, the severe deformation of the formwork in a short time due to the sun and rain must be avoided. At the construction site, the formwork shall be stored on a flat, level and dry site to avoid being stored in a particularly hot and dry place. In addition, in order to prevent the aging of the coating on the formwork surface, it is necessary to avoid exposure to the sun.
In the humid environment, the steel or plastic packing belt shall be removed. When handling the formwork with mechanical equipment, attention shall be paid to re bundling to avoid the loss and accident caused by the decline of the formwork.
After the formwork is disassembled, it shall be cleaned immediately with non-metallic tools such as brushes, plastic or wooden scrapers, and the timber shall be placed under it. The edges and corners shall be aligned and stacked on the flat ground. The slab surface shall not be in direct contact with the slab surface. The formwork shall be ventilated to prevent sunlight and rain, and shall be inspected regularly.
