Roller coating plate: roller coating plate is made by directly rolling coating under high pressure with a roller during processing. There is no gap between the surface layers, which is bright and smooth. The surface is smooth and flawless and integrated. High quality coating with high selectivity. Aluminum gusset plate manufacturers said that the layers are meticulous, the colors are balanced, and the colors are diverse. Due to the close combination between the coating and the plate surface, the aluminum gusset plate manufacturer said that the surface of the roll coated plate has high compressive strength and can be laser cut, cut, bent, homogenized, punched, connected and fixed. Edges are cut into shapes. There will be no obvious cracks and warps.
Roller coated plate is made by degreasing and chemical treatment on the surface of aluminum plate substrate, then roller coating high-quality paint, drying and curing. It is an imported coating attached to the surface of aluminum products. Strong adhesion, bright color, no color difference, stable performance, long service life. It can effectively control the accuracy and flatness of the plate and effectively eliminate the traditional aluminum spraying process. The dents and wrinkles on the ceiling surface make the decorative building uniform and bright. The nano roll coated plate has the functions of oil and pollution prevention.
Coated board: oil smoke abrasion resistance: the surface is PVC film. Manufacturers of aluminum gusset plates say this material is more oil resistant. It is also convenient to clean up. Also more wear-resistant. Water vapor resistance and moisture resistance: the surface layer is covered with film. The manufacturer of aluminum gusset plate said that the direct contact between water and aluminum profile is reduced, and the contact area of aluminum gusset plate is also reduced It is also more time-consuming. Multiple patterns: laminates have a wider range of patterns, with a variety of colors to choose from. The decorative effect of laminate is stronger, and it is also very popular! In fact, aluminum gusset plate manufacturers all say that they are very good aluminum gusset plate treatment processes, but the temperature resistance and bending effect of laminates are slightly inferior. So we can choose different aluminum gusset plate materials according to different use environment!
What is the difference between roll coated sheet and laminate? out of the ordinary. Roller coated plate is made by degreasing and chemical treatment on the surface of aluminum plate substrate, then roller coating high-quality paint, drying and curing. As for the coated plate, it is made by coating a layer of adhesive on the surface of the aluminum plate, and then pasting a high gloss film and a magic color film. The film thickness is different. The film thickness of the roll coated plate is only 0.04mm, while the film thickness of the film coated plate is thicker than that of the roll coated plate. Different decorative effects. The construction technology of roller coated plate is the method of roller coating, which is not easy to cause color difference, soft reflection, not easy to scratch and change color, but the effect is poor for laminates.
